Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32
  1. #11
    I need a standard brace bar if anyone has fallen out with theirs...



    Chris.



    Sent from my spackytard 'spell it how you like" iPhone

  2. #12
    Hmmmmmm, that might fit my V6.

    Will see what the bank's saying at the end of the month.

    Doh! Log in fail yet again. It's Chris (Limey)

  3. #13
    well whent out with the tape measure and the old level i had found and took some piks mate, seems two and a half inchs to the top of the plenum and 4 and a half too the top of the level roughly.

    any who pics are better than wordss.




    and a wide shot.


  4. #14
    Woodsport Paul Woods's Avatar
    Join Date
    Mar 2005
    Location
    Durham, UK birthplace of the 1.5,v6 and v8 Mr2
    Posts
    19,895
    Ok, so if i make your brace with its lower edge 3" above the strut top it will have 0.5" clearance to the plenum, i can do that, so would you like me to forge ahead mate?

    It'll take me slightly longer than a normal brace, the supports will need to be made from scratch.

    TB Quote of the month:"I split my ear open whilst masturbating" - Jasper Full story Here

  5. #15
    El Presidente nik's Avatar
    Join Date
    Mar 2005
    Location
    Poole, Dorset
    Posts
    5,393
    Blog Entries
    1
    Any chance I could have a pair of the mount tops and I can fabricated my own cross bar?

  6. #16
    Woodsport Paul Woods's Avatar
    Join Date
    Mar 2005
    Location
    Durham, UK birthplace of the 1.5,v6 and v8 Mr2
    Posts
    19,895
    Do you want just the base plate horseshoe shaped bit or the whole thing that bolts to the strut tops?

    TB Quote of the month:"I split my ear open whilst masturbating" - Jasper Full story Here

  7. #17
    Quote Originally Posted by Paul Woods View Post
    Ok, so if i make your brace with its lower edge 3" above the strut top it will have 0.5" clearance to the plenum, i can do that, so would you like me to forge ahead mate?

    It'll take me slightly longer than a normal brace, the supports will need to be made from scratch.
    Go ahead mate when do you need the Robert dinero?

  8. #18
    El Presidente nik's Avatar
    Join Date
    Mar 2005
    Location
    Poole, Dorset
    Posts
    5,393
    Blog Entries
    1
    Quote Originally Posted by Paul Woods View Post
    Do you want just the base plate horseshoe shaped bit or the whole thing that bolts to the strut tops?
    just the base plate horse-shoe bit..no way could i cut one of them with a grinder..

  9. #19
    Woodsport Paul Woods's Avatar
    Join Date
    Mar 2005
    Location
    Durham, UK birthplace of the 1.5,v6 and v8 Mr2
    Posts
    19,895
    Tiggs, no cash until i've made it for you with it being a one off.

    Nik i have an order in with the laser cutter, i'll get that sorted as soon as they arrive.

    TB Quote of the month:"I split my ear open whilst masturbating" - Jasper Full story Here

  10. #20
    Okey cokey mate and another little thing I noticed that engine lid hydraulic stay thingy , were did you get it could do with one as the standard ones a Gary glitter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •