Page 4 of 24 FirstFirst 1234567814 ... LastLast
Results 31 to 40 of 234

Thread: Hi all

  1. #31
    Updated cost post

    Don't really want to add it all up yet though....

    Sent from my BLA-L09 using Tapatalk

  2. #32
    Woodsport Paul Woods's Avatar
    Join Date
    Mar 2005
    Location
    Durham, UK birthplace of the 1.5,v6 and v8 Mr2
    Posts
    19,882
    A wire wheel on a bench grinder will clean the heavy carbon deposits from the valves but they need to be ground back in to the head valve seats with coarse then smooth grinding paste, i use one of these for best results....

    https://www.ebay.co.uk/itm/FLEXIBLE-...UAAOSwmFpZqqEb

    TB Quote of the month:"I split my ear open whilst masturbating" - Jasper Full story Here

  3. #33
    Good shout!

    Removed all the rings, just waiting for my honing tool to rock up

    Spent a bit of time cleaning up the injectors and made a start on the valves


    Sent the head off so should go pick that up Thursday and can then start rebuilding them and then waiting for oil pump to turn up and a few other bits

    Sent from my BLA-L09 using Tapatalk

  4. #34
    Got the heads back

    Cost £120 for both skims

    Started to lap the valves in today and got the pistons in and got the oil cooler on

    Next job is to get the exhaust valves lapped in and then do the same on the other head then the heads can go on


    Just waiting on oil pump and bearings and then the bottom end can go back together

    Plenty to get on with though

    Need to order some exhaust studs and replace them while it's all out

    Sent from my BLA-L09 using Tapatalk

  5. #35
    Oil pumps turned up

    Still having problems with big end and main bearings

    Ordered some but then get told only 2 in stock which is annoying so then order from America to be told only got 3 in stock then the old place has come back and says they can get 6 big ends but not till april

    Grrrr

    Sent from my BLA-L09 using Tapatalk

  6. #36
    Valves lapped, springs and keepers in, cams polished, heads on, cams in intake manifold back on

    Just bottom end to rebuild now

    Sent from my BLA-L09 using Tapatalk

  7. #37
    Cam belt done
    Oil pump
    Injectors

    Sent from my BLA-L09 using Tapatalk

  8. #38
    Golly you are flying. Colour scheme looks great, that's going to look pretty damn spiffy in the engine bay.

    :)

  9. #39
    Cheers mate, paints not the best close up but who looks close up!? Haha

    Just gota wait 4 weeks for the big end bearings to turn up now grrr

    Sent from my BLA-L09 using Tapatalk

  10. #40
    Good news!

    Big end bearings will be here on Thursday

    Got a load of missing bolts today too

    Getting a turbo flywheel at the weekend and then I can get that machined

    Bought a downpipe and intake hose from a member here but still not shown up which is rather annoying.... Hopefully he replied to my messages and it turns up!


    Also sorted insurance too 370 quid with the v6 so not too bad I thought

    Sent from my BLA-L09 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •